Siemens SINUMERIK 802S Diagnostics Manual page 99

01.02
No./Name
25. SINGLEBLOCK_
MAINBLOCK
26. SINGLEBLOCK_PATH
27. STARTPROG
28. CHANNELSTARTPROG
29. RESUMEPROG
30. RESUMEJOGREFDIGIT
31. STARTDIGITIZE
32. STOPALL
33. STOPPROG
34. STOPJOGREF
35. STOPDIGITIZE
36. STARTSIG
37. STOPSIG
© Siemens AG 2002 All Rights Reserved
SINUMERIK 802S/802C (DG)
Explanation Not allowed if
Activate main
program single
block (BTSS
variable and VDI
signal: Activate
single block)
Activate travers-
ing single block
(BTSS variable
and VDI signal:
Activate single
block)
Start program 1. program state active,
execution 2. an alarm response is provided
(VDI signal: NC which prevents start or forces de-
Start) celeration.
3. reference-point approach not yet
carried out
Start program 1. program state active
execution 2. an alarm response is provided
(channel com- which prevents start or forces de-
celeration.
munication, NC
block: Start) 3. reference-point approach not yet
carried out,
4. inappropriate operating mode
selected (Automatic only)
Start continuation 1. program state active,
of program 2. an alarm response is provided
execution which prevents start or forces de-
(VDI signal: NC celeration.
Start) 3. reference-point approach not yet
carried out.
Start continuation 1. Jog movement active
of selected 2. an alarm response is provided
program mode - which prevents start or forces de-
Jog, Reference celeration.
Point or Digitalize
--.
(VDI signal: NC
Start)
Start program 1. Jog movement is active
execution in 2. an alarm response is provided
Digitalize sub- which prevents start or forces de-
mode celeration.
(VDI signal: NC 3. reference-point approach is not
Start) yet carried out
Stop all axes.
(VDI signal: Stop
All or Reset key)
Carry out pro-
gram stop.
(NC block: M0)
Stop JOG
movement
(VDI signal: NC
Stop)
Stop digitaliza-
tion.
(VDI signal: NC
Stop)
Start selected 1. Process switch active (mode
program mode change, Digitalize ON/OFF, Over-
(VDI signal: NC store ON/OFF)
Start) 2. an alarm response is provided
which prevent start or forces de-
celeration.
3. a process is running (NC program,
block search, loading of machine
data)
Stop active
program mode
(VDI signal: NC
Stop)
6FC5598-3AA20-0BP2
1 Alarms
Remedy
⇒ -
⇒ Carry out alarm clear condi-
tion
⇒ Approach reference point
⇒ Secure Start with WAITE
⇒ Carry out alarm clear condi-
tion
⇒ Approach reference point
⇒ Select program mode
⇒ -
⇒ Carry out alarm clear condi-
tion
⇒ Approach reference point
⇒ -
⇒ Carry out alarm clear condi-
tion
⇒ -
⇒ Carry out alarm clear condi-
tion
⇒ Approach reference point
⇒ -
⇒ Carry out alarm clear condi-
tion
⇒ -
1-99