Siemens SINUMERIK 802S Diagnostics Manual page 41

01.02
Program continua-
tion by
14 000
Explanation
Response
Remedy
Program continua-
tion by
14 001
Explanation
Response
Remedy
Program continua-
tion by
14 011
Explanation
Response
Remedy
© Siemens AG 2002 All Rights Reserved
SINUMERIK 802S/802C (DG)
Power ON
Channel %1 block %2 error at end of file
%1 = Channel number
%2 = Block number, label
M02 or M30 is expected as the file end of main programs, and M17 as the file
end for subroutines. No subsequent block is provided from the block prepara-
tion (data management) although no file end has been programmed in the pre-
ceding block.
Alarm display.
Interface signals are set.
Interpreter stop.
NC Start inhibited.
Check whether the end of program has been forgotten to be entered, or whether
a jump to a program section which contains the end-of-block character is car-
ried out in the last program block.
Press the RESET key to clear the alarm. Restart part program.
Channel %1 block %2 error at end of block
%1 = Channel number
%2 = Block number, label
A system-internal data manipulation (e.g. reloading from an external) can be
followed by a partial file, without LF as the last character.
Alarm display.
Interface signals are set.
Interpreter stop.
NC Start inhibited.
Read out the part program and use a text editor to modify the program (e.g.
insert blanks or comments in front of the displayed block) to have a modified
structure of the part program when re-reading the part program.
Press the RESET key to clear the alarm. Restart part program.
Channel %1 block %2 called program does not exist or is not released
%1 = Channel number
%2 = Block number, label
The called program (main program or subroutine) has been called from the
currently running part program (main program or subroutine). However, either
it does not exist in the NC memory, or the option for the used function is not
enabled.
Alarm display.
Interface signals are set.
Interpreter stop.
NC Start inhibited.
Correct the NC part program.
6FC5598-3AA20-0BP2
1 Alarms
1-41