Siemens SINUMERIK 802S Diagnostics Manual page 4


3ls SINUMERIK Documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Remarks" column:
A . . . . . New documentation
B . . . . . Unrevised reprint with new Order No.
C . . . . . Revised edition with new status.
If factual changes have been made on the page since the last edition, this is indicated by a new edition
coding in the header on that page.
Edition Order No.
02.99 6FC5598–2AA20–0BP0
04.00 6FC5598–2AA20–0BP1
01.02 6FC5598–3AA20–0BP2
This manual is part of the documentation on CD-ROM (DOCONCD)
Edition Order No.
11.02 6FC5298-6CA00–0BG3
Trademarks
SIMATICr, SIMATIC HMIr, SIMATIC NET r, SIROTECr, SINUMERIKr,SIMODRIVEr and
MOTION-CONNECTr are Siemens trademarks. All other product and system names are registered
trademarks of their respective owners and must be treated accordingly.
Further information is available on the Internet under:
http://www.ad.siemens.de/sinumerik
This publication was produced with WinWord V7 and
Designer V 6.0
The reproduction, transmission or use of this document or its
contents is not permitted without express written authorization.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design,
are reserved.

Siemens AG 2002. All rights reserved.
Order No. 6FC5598–3AA20–0BP2
Printed in the Federal Republic of Germany
Remarks
A
C
C
Remarks
C
Other functions not described in this documentation might be
executable in the control. This does not, however, represent an
obligation to supply such functions with a new control or when
servicing.
We have checked that the contents of this publication agree with the
hardware and software described herein. Nonetheless, differences
might exist and therefore we cannot guarantee that they are
completely identical. The information given in this publication is
reviewed at regular intervals and any corrections that might be
necessary are made in the subsequent printings. Suggestions for
improvement are welcome at all times.
Subject to change without prior notice.
Siemens–Aktiengesellschaft