Siemens SINUMERIK 802S Diagnostics Manual page 43

01.02
14 015
Explanation
Response
Remedy
Program continua-
tion by
14 040
Explanation
Response
Remedy
Program continua-
tion by
14 050
Explanation
Response
Remedy
Program continua-
tion by
© Siemens AG 2002 All Rights Reserved
SINUMERIK 802S/802C (DG)
Channel %1: no access permission for file
%1 = Channel number
The user has no execution rights for the file.
Alarm display.
Interface signals are set.
Interpreter stop.
NC Start inhibited.
Alter user rights
Press the RESET key to clear the alarm. Restart part program.
Channel %1 block %2 error in end point of circle
%1 = Channel number
%2 = Block number, label
With circular interpolation, the distance either between the circle radii for start
point and end point or the distance between the circle center points is greater
than defined in the machine data.
1. Radii: The NCK calculates the radii for start and end point from the
current start point and the remaining programmed circle parameters. The
alarm message is output if the difference of the circle radii is greater than
the value in MD 21 000 CIRCLE_ERROR_CONST.
2. Center points: If the circles have a permissible difference, it is checked
whether the circle center point on the mean perpendicular is between start
and end point.
Alarm display.
Interface signals are set.
Interpreter stop.
NC Start inhibited.
Check MD 21 000 CIRCLE_ERROR_CONST. If the values are within rea-
sonable limits, the circle end point or the circle center point of the part program
block must be programmed more exactly.
Press the RESET key to clear the alarm. Restart part program.
Channel %1 block %2 nesting depth for arithmetic operations exceeded
%1 = Channel number
%2 = Block number, label
To calculate arithmetic expressions in NC block, an operand stack of fixed size
is used. With very complex expressions, this stack might overflow.
Alarm display.
Interface signals are set.
Interpreter stop.
NC Start inhibited.
Distribute complex arithmetic expressions over several, more simply structured
arithmetic blocks.
Press the RESET key to clear the alarm. Restart part program.
6FC5598-3AA20-0BP2
1 Alarms
1-43