Siemens SINUMERIK 802S Diagnostics Manual page 16

1 Alarms
4065
Explanation
Response
Remedy
Program continua-
tion by
4 075
Explanation
Response
Remedy
Program continua-
tion by
4 076
Explanation
Response
Remedy
Program continua-
tion by
1-16
Battery-backed memory is restored from backup copy (risk of loss
of data !)
During power-up, it has been detected that inconsistencies are possible in the
battery-backed memory.
The battery-backed memory was initialized using the last back-up copy. As a
result, the changes in the battery-backed memory, which have been made since
the last update of the backup copy, were lost. This may be caused by the fact
that the buffer time has been exceeded. Please make sure that the appropriate
on-time of your control system complies with the on-time required by the Start-
up Guide.
The current backup copy of the battery-backed memory was created using the
internal data backup carried out last using the softkey "Save data" in the HMI.
Alarm display
Interface signals are set.
NC Start inhibited
Restart the control system.
Machine data %1 (and may be others) not altered - permission level %2
needed
%1 = String: MD identifier
%2 = Write protection level of the MD
When executing a TOA file, you have tried to write into data whose protection
level is higher than the right to access currently set on the control. Your value
entry will be denied.
This alarm is only set when the first violation of the right to access is detected.
Alarm display.
Enter the password to set the required access level or delete the respective
machine data from the MD file.
Press the Clear key to clear the alarm. No further operation required.
%1 machine data could not be modified with permission level %2
%1 = Number of MD
%2 = Set user class
When executing a TOA file, you have tried to write into data whose protection
level is higher than the right to access currently set on the control. Your value
entry will be denied.
This alarm is output when alarm 4075 is acknowledged. It can only be cleared
by Power On.
Alarm display.
Set the required access level either using the key-operated switch or be entering
the password and/or delete the respective machine data from the MD file.
Power ON
6FC5598-3AA20-0BP2 © Siemens AG 2002 All Rights Reserved
SINUMERIK 802S/802C (DG)
01.02