Rebooting The Server - Avaya S8 Series Manual

Upgrading Communication Manager on Avaya S8400 Server from R3.x/R4.x/R5.x to R5.2 using Manage
7. Click Continue.
The installation takes 10 to 20 minutes.
The Install in Progress window refreshes every 10 seconds or on demand by clicking
Refresh. When complete, the system displays the Reboot Server window.

Rebooting the server

Note:
When you reboot the server, it can no longer communicate with the Web
Note:
interface. The Reboot in Progress Web page remains on your screen until the
reboot is complete. Although the Continue button is visible, do not click
Continue yet.
To reboot the server.
1. Click Reboot.
The system displays the Reboot in Progress screen. The tray of the CD-ROM drive opens
automatically.
2. Remove the CD-ROM from the CD-ROM drive.
!
CAUTION:
If you do not remove the CD-ROM and the tray of the CD-ROM drive closes
CAUTION:
again, the system might try to reboot from the software on the CD-ROM.
Note:
The reboot can take 5 minutes or longer. The system does not automatically tell
Note:
you when the reboot is complete.
Note:
The Web page does not show progress of the reboot process, so you do not
Note:
know when the reboot is complete. To check the progress, see
progress
3. Wait 3 minutes and then click Continue. If you click Continue before the reboot is finished,
the screen displays Expired Page. If you see the Expired Page message, refresh the
browser. If the Session Timeout screen appears, close the screen, logoff, and log on
again. Select Manage Software, select the option Join this upgrade session in progress
and monitor its activity. Click the Pickup button.
90 Upgrading Avaya Aura™ Communication Manager on Avaya S8xxx Servers
on page 91.
Verifying reboot