Avaya S8 Series Manual page 252

DAL: Removing or Installing
Figure 21: Installing the DAL2 card in an S8730
7. Carefully insert the DAL2 card into the middle slot of the PCI riser cage (1 on
8. Insert the PCI retaining clip back into the slot (2 on
9. Lock the PCI retaining clip (3 on
10. Align the PCI riser cage with the guides on the chassis and slide the riser cage into place.
11. While pressing down, lift and turn the thumbscrew knobs clockwise until they are tight or
use the Trox wrench to tighten.
12. Turn the thumbscrews counterclockwise to lower the thumbscrew knobs.
13. Return the Trox wrench to the Trox wrench holder (1 on
14. Install the access cover on the server.
15. Press down on the hood latch handle to lock the access panel in place.
252 Upgrading Avaya Aura™ Communication Manager on Avaya S8xxx Servers
1
2
Figure 21).
3
hw873dai LAO 081507
Figure 21).
Figure 20).
Figure 21).