Verifying Software Operation; Checking System Status - Avaya S8 Series Manual

Upgrading Communication Manager on Avaya S8400 Server from R3.x/R4.x/R5.x to R5.2 using Manage
The specified entry was not found.
4. Type ping -t 192.11.13.6 to access the server. The -t causes the ping to repeat until
you get a response. When you get a response, in about 3 minutes, wait an additional 30
seconds before you go back to the Web interface.
5. Type ctrl c to stop the ping.
6. Close the MS-DOS window.
Note:
The upgrade is now finished.
Note:

Verifying software operation

To verify the software version.
1. Under Server, click Software Version.
2. Look in the Communication Manager reports as field to verify that the new software is
present.

Checking system status

To check the system status:
1. Under Server, click Status Summary to verify that the server mode is active.
2. Click Process Status.
3. Select Summary and Display once. Click View to access the View Process Status Results
screen.
4. Verify that all the processes are UP.
92 Upgrading Avaya Aura™ Communication Manager on Avaya S8xxx Servers