Xl Configuration Considerations - Avaya S8 Series Manual

9. In the Backspace key area, select Control-H.
This activates the backspace key while you are using the SAT.
10. Click Open.
Note:
If you have not connected to this particular server before, ssh prompts you to
Note:
accept the server host key. If you save this key when prompted, you will not be
prompted if you connect again later. If you do not save the key, PuTTY prompts
you the next time you connect to this server.
When connecting through the Services laptop interface on the server, if you save the
host key, the host will be identified as 192.11.13.6. If you later connect to a different
server through its laptop interface, this new host also appears as 192.11.13.6, but it
will have a different key. You get a prompt in this case because it appears that the host
key has changed.
11. If necessary, click Yes to accept the server's host key.
12. Log in to the server.

XL configuration considerations

Note:
If you are upgrading an S8720 main server, proceed to
Note:
server for S8720 in XL configuration
If you are upgrading an S8720 ESS server, proceed to
S8720 in XL configuration
Skip this section in the system, if any of the following is true:
- The system including MAIN (primary controllers) is already configured as XL
- The primary controllers are S8720 and will not be configured as XL
Configuring the main server for S8720 in XL configuration
This section applies only to a main server configured for an XL. If you are not enabling the
server as an XL configuration, skip this section and proceed to
the first S8700-Series Server
Note:
If the main servers are configured as an XL configuration, ESSs and LSPs also
Note:
must be configured to be compatible with the main server.
on page 175.
on page 175.
on page 172.
Upgrade tasks for the first server
Configuring the main
Configuring the main server for
Performing an integrity check on
Issue 1 May 2009 175