Inserting The Communication Manager Cd Into The Server; Copying Communication Manager To The Server - Avaya S8 Series Manual

5. Type update_show and press Enter to list Communication Manager files to verify that the
new service pack file was unpacked.
6. Type update_activate update, where update is the release or the issue number of
the latest service pack file, such as 00.0.339.4-xxxx. Do not use the .tar.gz extension at
the end of the file name. Press Enter.
The server might reboot. If the system reboots, the system might also display the following
message:
/opt/ecs/sbin/drestart 2 4 command failed.
Ignore this message. You must wait until the restart or the reset is complete before you
enter additional commands.
The server displays a message that the service pack was applied.
7. If the system displays the question, Commit this software?, enter y.
8. Type update_show again and press Enter to list Communication Manager files to verify
the service pack file was activated.
9. If your Web browsers are open, refresh the screen.

Inserting the Communication Manager CD into the server

Insert the CD that contains Communication Manager into the CD-ROM drive on the server.
Close the tray.
Note:
You can copy Communication Manager software from an http or tftp server onto
Note:
the server. In this case, skip this step.

Copying Communication Manager to the server

To copy Communication Manager to the server:
1. On the browser toolbar, click Refresh to reload the current page.
Upgrade tasks for the new standby server (second server)
Issue 1 May 2009 187