Avaya S8 Series Manual page 237

3. In the Port field, type 22 (the SAT is 5022).
4. Under Protocol, select SSH.
5. In the PuTTY menu on the left, click Connection > SSH.
The Options controlling SSH connections dialog box opens.
6. In the Preferred SSH protocol version field, select 2.
7. In the Encryption options window, use the up and down arrows to set AES (SSH-2) as the
top option and 3DES as the second option.
Note:
You can save the PuTTY settings and customize the PuTTY tool with other
Note:
settings, such as for color. For documentation on PuTTY, see
docs.html.
8. In the PuTTY menu on the left, click Terminal > Keyboard.
The Options controlling the effects of keys dialog box opens.
9. In the Backspace key area, select Control-H.
This activates the backspace key while you are using the SAT.
10. Click Open.
Note:
If you have not connected to this particular server before, ssh prompts you to
Note:
accept the server host key. If you save this key when prompted, you will not be
prompted if you connect again later. If you do not save the key, PuTTY prompts
you the next time you connect to this server.
When connecting through the Services laptop interface on the server, if you save the
host key, the host will be identified as 192.11.13.6. If you later connect to a different
server through its laptop interface, this new host also appears as 192.11.13.6, but it
will have a different key. You get a prompt in this case because it appears that the host
key has changed.
11. If necessary, click Yes to accept the server's host key.
12. Log in to the server.
Accessing the command line interface with terminal emulation
To use a command line interface in a terminal emulation window:
Note:
Avaya Native Configuration Manager, Avaya Terminal Emulation, and
Note:
HyperTerminal are the only supported terminal emulation programs.
1. Open your terminal emulation application.
Using the command line interface
http://www.putty.nl/
Issue 1 May 2009 237