Busying Out Previously Busied-Out Trunks; Checking For Translation Corruption; Resolving Alarms - Avaya S8 Series Manual

2. Ensure that the administration for the Start Time and Stop Time fields is the same as
before the upgrade.

Busying out previously busied-out trunks

If you recorded any busyouts earlier on the main server only, you must ensure that they
●
also are busied out after the migration.

Checking for translation corruption

To check for translation corruption:
1. On the SAT, type newterm and press Enter.
2. If you see the following message:
Warning: Translation corruption detected . . .
then follow the normal escalation procedure for translation corruption before continuing the
upgrade.

Resolving alarms

To clear alarms:
1. Use the System Management Interface (SMI) (formerly known as Maintenance Web
Interface). Under Alarms, click Current Alarms to examine the alarm log.
2. Select the server alarms that you want to clear and click Clear, or click Clear All.
3. Resolve or clear Communication Manager alarms with SAT commands and the
Maintenance Commands Reference and Alarms Maintenance books.
Post-Upgrade tasks
Issue 1 May 2009 99