Rebooting The Standby Server - Avaya S8 Series Manual

- Do not update authentication information.
6. Click Continue.
7. Click Continue.
The system displays the Begin Installation screen. The page summarizes the request you
have made.
8. Click Continue.
The installation takes 10 to 20 minutes.
The Install in Progress screen refreshes every 10 seconds or on demand by clicking
Refresh. When complete, the system displays the Reboot Server screen.

Rebooting the standby server

To reboot the standby server.
Note:
When you reboot the standby server, it can no longer communicate with the Web
Note:
interface. The Reboot in Progress Web page displays during the reboot.
Although the Continue button is visible, do not click Continue yet.
1. Click Reboot.
The system displays the Reboot in Progress screen. The tray of the CD-ROM drive opens
automatically.
2. Remove the CD from the CD-ROM drive.
!
CAUTION:
If you do not remove the CD and the tray of the CD-ROM drive closes again, the
CAUTION:
system might reboot from the software on the CD.
Note:
The reboot can take approximately 3 minutes. The system does not automatically
Note:
report when the reboot is complete.
To check the reboot progress, see
3. Wait 3 minutes and then click Continue.
If you click Continue before the reboot is finished, the browser displays Expired Page. If
you see the Expired Page message, refresh the browser. If the system displays Page
cannot be displayed, use the browser Back button to return to the Reboot in Progress
screen. If the Session Timeout screen appears, close the screen, logoff, and log on again.
Select Manage Software, select the option Join this upgrade session in progress and
monitor its activity. Click Pickup.
Upgrade tasks for the first server
Verifying reboot progress on page 170.
Issue 1 May 2009 169