Upgrading Firmware On Tn Circuit Packs - Avaya S8 Series Manual

Upgrading firmware on TN circuit packs

TN circuit packs require firmware upgrades periodically. You can download new firmware to
specific, programmable circuit packs. Programmable circuit packs have a "P" in their suffix. For
example TN799DP is programmable, but TN799C is not. This programmable capability reduces
the need to physically remove circuit packs and return them to Avaya for firmware updates.
In addition, with Communication Manager R3.1 and higher, you can use a central firmware
despository on an SCP-enabled file server to update one or all of your non-self-downloadable
circuit packs and the following versions of self-downloadable circuit packs:
TN799DP Control-LAN (C-LAN) circuit pack, firmware version 17 or higher
●
TN2602AP IP Media Resource 320, firmware version 20 or higher
●
TN2501 VAL circuit pack, firmware version 10 or higher
●
Finally, with Communication Manager R3.1 and higher, you can use the Software Update
Manager to download firmware to TN circuit packs.
To access the procedures for upgrading the firmware on these circuit packs, go to
ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/firmware/
TNpackFirmwareDownloadInstructions.pdf
!
CAUTION:
If you are a customer administrator, you might be required to access the
CAUTION:
Download Center Web site in order to download firmware. For instructions on
setting up access to the Download Center, access
click on the appropriate links.
http://support.avaya.com
Issue 1 May 2009
and
223