Table of Contents
Advertisement
Upgrading Communication Manager on Avaya S8400 Server from R3.x/R4.x/R5.x to R5.2 using Manage
Backing up recovery system files
To back up the system configuration files:
1. Under Data Backup/Restore, click Backup Now.
2. Select the data sets, including Avaya Call Processing (ACP) translations and Save ACP
translations prior to backup. An ESS server or an LSP gets translatiaons from the main
server, so there is no reason to back up the translations on an ESS server or an LSP. Do not
select Full Backup because this option does not save translations.
Note:
If you back up to a flashcard, Avaya recommends that you use a different
Note:
flashcard from the one with the prior release translations. You might need these
translations if you need to back out of the upgrade, migration, or conversion
procedure.
3. Select the backup method.
4. Click Start Backup to start the back up process.
Releasing alarm suppression (optional)
If you complete the upgrade well before the time set when you suppressed alarming, you might
want to release alarm suppression manually rather than wait for the system to release alarm
suppression.
To release alarm suppression:
1. Access the command line interface of the server with an SSH client like PuTTY and an IP
address of 192.11.13.6.
2. Log in as craft or dadmin.
3. Type almsuppress -s n and press Enter to release alarm suppression.
4. Log off.
100 Upgrading Avaya Aura™ Communication Manager on Avaya S8xxx Servers
Advertisement
Table of Contents
