Temporary Deletion Of The Interfering Channel From Scanning; Squelch Levels Enquiry; Squelch Levels Setup; Scan - Alinco DJ-A41 Instruction Manual

ADVANCED OPERATIONS

Temporary Deletion of the Interfering Channel from scanning

This function can temporarily skip the interfering channel or occupied channel from scan list.
When scan stops on one channel, pressing the programmed key ; it beeps and temporarily deletes
this channel from the scan list. If only one or two channels are in the scan list, this operation is not
available. Restart the transceiver to restore the temporarily deleted channels into the list again.

Squelch Levels Enquiry

Under the standby conditions, pressing and holding the programmed key, it will announce current
squelch level by voice.

Squelch Levels Setup

Under the standby conditions, pressing and holding the programmed key, it will set the squelch and
announces the level by voice.

Scan

Scan function is to automatically search the busy channels.
Under the standby conditions, pressing and holding the programmed key, a beep sounds and starts
scanning. It scans channels in scan list one by one. When one channel receives a matching signal,
the transceiver will temporarily stay in this channel till the signal disappears. Pressing the key again,
it beeps twice, and stops scanning and returns to the channel pre-programmed as "return-channel".
17
Professional
FM Transceiver