Setting The Frequency In The Vfo Mode - Alinco DJ-V5T/E Instruction Manual

16
2-3 Setting the Frequency in the VFO Mode
The VFO made has one channel] each for FM radio, VHF, and UHF.
The VFO mode allows the frequency to be set easily by using the Dial
or the &/W keys. Allowed frequency ranges:
FM radio DJ-V5T:76.000- 107.995 MHz
DJ-V5E:87.500-107.995 MHz
VHF band DJ-V5T:144.000- 147.995 MHz
DJ-V5E: 144.000- 145.995 MHz
UHF band DJ-V5T:420.000-449.995 MHz
DJ-V5E:430.000-439.995 MHz
W@ Switching the Band
Press the BAND/SET key to switch the band. Each press of the key
changes tbe band as shown below.
VHF band — UHF band — FM radio — VHF band -*---
Wi Adjusting the Frequency in Tuning Steps
Rotate the Dial clockwise one click to increase the frequency by
one tuning step. Rotate the Dial counter-clockwise for one click to
decrease it by one tuning step.
When using the keyboard, press the #(ENT/44) key to increase the
frequency one tuning step. Press * ( : /W) to decrease it one
tuning step.
Note: When the frequency exceeds the upper (or lower) limit
of the currently selected band, the ee jumps to
the lower (or upper) limit.
References: Holding the A/'W keys down for 0.8 seconds scrolls
through the frequency band.