Tone Squelch / Dcs Squelch (Sub Tone Ctcss / Dcs ) Decode Tone Setup; Tone Squelch / Dcs Squelch (Sub Tone Ctcss / Dcs ) Encode Tone Setup - Alinco DJ-A40 Instruction Manual

ADVANCED OPERATIONS

Tone Squelch / DCS squelch (Sub tone CTCSS / DCS ) Decode Tone Setup

This function enables the selective-calling and speaker sounds only when a
signal with matching encoded CTCSS/DCS tone being received.
1. after pressing 【 A 】 key, while
【 8 】 key to enter into function menu.
2. Press 【 B 】 / 【 C 】 key to choose Menu 1 and display "R-CDC" .
3. Press 【 A 】 then press 【 1 】 key to choose CTCSS, DCS or OFF. When DCS
signaling is selected, press 【 】 key to choose DCS positive or inverse code.
4. Press 【 B 】 key or 【 C 】 key to choose the desired CTCSS / DCS decode tone.
5. Available CTCSS tones: 67Hz- 254.1Hz, 50 tones in total, Default is OFF.
6. DCS: 017N-765I, 232 codes, [N] stands for positive, [I] stands for inverse
codes. Default is OFF.
＊PRESS 【 A 】 key again then press 【 B 】 or 【 C 】 to move to the next menu, or
press PTT to set and exit to a communication mode.

Tone Squelch / DCS squelch (Sub tone CTCSS / DCS ) Encode Tone Setup

1. after pressing 【 A 】 key, while
into function menu.
2. Press 【 A 】 key to choose Menu 2 and display "T-CDC" .
3. Press 【 A 】 then press 【 1 】 key to choose CTCSS, DCS or OFF. When DCS signaling is
selected, press 【 】 key to choose DCS positive or inverse code.
36
Professional
FM Transceiver
icon is displayed on the top left corner, press
icon is displayed on the top left corner, press 【 8 】 key to enter