Table of Contents
Advertisement
a.Functions Allotted to the Keypad
[ 8-5 Tone Squelch Function/DeS Function Settings)
There are two ways to receive calls from particular stations such as club members
and local stations, through the use of the Tone Squelch (CTCSS) function or the
DCS function.
When you transmit using previously selected tone signals. these functions allow
signal reception by opening the squelch only when the tone signals of your station
and the tone squelch or DCS code signals of another party's station correspond
with each other.
When receiving in dual band mode, the tone squelch function or the DCS function
will only be valid on one band.
o
C AUT10N
·The tone squelch function and the DCS function can't be used at the
same time.
1.Press the
fW:
key and
iii
will be lighted on the display.
T E
2.Every time the
5
key is pressed, the function switches in the order of
tone-·tone squelch 'reverse tone squelch-'DCS-'setting release (normal
mode).
'The modulated-carrier canceller function will only be displayed on the sub band.
8·5·1 Tone Squelch Function
There are three types of tone squelch functions:
Tone (CTCSS encode):
This function can be set only to encode. It can be used to access a
repeater. You can't use this mode for stand-by reception of a particular
station.
Tone Squelch (CTCSS ENC.lDEC.):
By using the encoder/decoder functions, you can use the selective receive
option.
Reverse Tone Squelch (CTCSS E/D REV.):
This is a setting for the decoder function and the squelch closes only when
there are tones.
1.Press the
'YiC
key and light
iii
on the
display.
54
T
2. Press the
key several times and select
"CTCSS encode", "CTCSS ENCJDEC."
and "CTCSS EID REV.".
145.000
crcss
encode
88. 5Hz
Advertisement
Table of Contents
