Installing Memory Modules - Fujitsu PRIMERGY TX200 S2 User Manual

7.4 Installing Memory Modules

Additional memory will help to increase the amount of data to read at a time and
improve the server processing capability.
• When installing or removing a memory module, turn off the server, all
peripheral devices, and any other connected devices. Also unplug all power
cables from the outlet.
Failure to do so can cause electric shock.
• Use our genuine memory modules only.
Failure to do so may cause a device failure, fire, or electric shock.
• Wait for a sufficient period of time after server shutdown before installing or
removing memory.
Failure to do so can cause burns.
• When installing or removing memory, make sure to remove the screws on the
specified points only. There is a chance of injury if screws other than those on
the specified points are removed. This could also damage the server.
• Touch only the specified part of the printed circuit board.
This could cause injury. This could also damage the server.
• Memory modules are made of delicate components that are extremely
sensitive to static electricity, and they can be destroyed by static electricity
from your clothes or body. Before handling them, first touch some metallic
object to discharge static electricity.
• Do not insert and remove memory modules repeatedly. This could damage the
server.
• As shown in the figure below, hold the edges of the memory module. Do not
touch the gold contacts.
Do not touch this part.
PRIMERGY TX200 S2 User's Guide
Memory module
7
189