Bypass Tray Fault Rap - Xerox VersaLink B7025 Service Manual

024-954, 024-958 Bypass Tray Fault RAP

BSD-ON: BSD 7.13 Bypass Tray Paper Sensing
024-954 The bypass tray is empty.
024-958 Bypass tray paper size mismatch.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Switch off, then switch on the machine,
Procedure
Enter dC330, code 075-100, bypass tray no paper sensor. Manually actuate the bypass tray no
paper sensor, PL 70.40 Item 12. The display changes.
Y N
Check the bypass tray no paper sensor, refer to
Install new components as necessary:
• Bypass tray no paper sensor, PL 70.40 Item
• Drive PWB, PL 1.10 Item 3.
Status Indicator RAPs
024-954, , 024-955
WARNING
GP 10.
GP 7 How to Check a Sensor.
12.
024-955 Tray 6 Empty RAP
BSD-ON: BSD 7.15 HCF Paper Stacking
024-955 Tray 6 is empty.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Switch off, then switch on the machine,
Procedure
Enter dC330, code 078-200, HCF no paper sensor. Manually actuate the HCF no paper sen-
sor, PL 80.61 Item 19. The display changes.
Y N
Check the HCF no paper sensor. Refer to
Perform the 078-250 HCF Lift Fault RAP. Check the HCF feed/lift motor. If the fault persists,
install new components as necessary:
• HCF no paper sensor, PL 80.61 Item
• HCF PWB, PL 70.60 Item 9.
April 2017
2-326 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
GP 7 How to Check a Sensor.
19.
Launch Issue