016-604 Debug Log Created RAP
016-604 Debug log auto creation by system.
Procedure
Switch off, then switch on the machine,
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
GP
10.
016-606, 016-608 Controller Connection Fail RAP
016-606 Cont-BP cable connection fail.
016-608 Cont-drive PWB cable connection fail.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1.
Switch off, then switch on the machine,
2.
Ensure that all connectors on the drive PWB,
Item 6
are securely connected. Ensure all surface mounted modules on both PWBs are
securely connected.
3.
Reload the software,
GP
4.
4.
If the fault persists, install a new components as necessary:
•
ESS PWB,
PL 3.10 Item
•
Drive PWB,
PL 1.10 Item
April 2017
2-171
WARNING
GP
10. Disconnect the power cord. Electricity can cause
GP
10.
PL 1.10 Item 3
and the ESS PWB,
6.
3.
Status Indicator RAPs
016-604, 016-606, 016-608
PL 3.10