Rep 12.10 Main Paddle Shaft Assembly - Xerox VersaLink B7025 Service Manual

7. Remove the compiler exit sensor, Figure
a. Release the harness from the two clamps (1).
b. Disconnect the connector (2).
c. Remove the compiler exit sensor (3).
Figure 4 Compiler exit sensor removal
Replacement
The replacement is the reverse of the removal procedure.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
4:

REP 12.10 Main Paddle Shaft Assembly

Parts List on PL 12.12
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the integrated office finisher,
2. Remove the compiler assembly,
3. Remove the gear, Figure 1:
a. Remove the E-clip (1).
b. Remove the gear (2).
c. Remove the KL-clip (3).
d. Remove the gear (4).
April 2017
4-67
WARNING
GP 10. Disconnect the power cord
REP 12.1.
REP 12.19.
Figure 1 Gear removal
Repairs and Adjustments
REP 12.9, REP 12.10