Rep 80.1 Tray 1 Feeder Assembly - Xerox VersaLink B7025 Service Manual

REP 80.1 Tray 1 Feeder Assembly

Parts List on PL 80.05
Removal
NOTE: A video of this procedure is available on the EDOC. The video is accessible from the
Library menu on the Service Interface.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Pull out tray 1.
2. Open the LH transport assembly.
3. Remove the bypass tray, REP 70.2.
4. Remove the bypass tray R cover, Figure
a. Remove the screw (1).
b. Remove the bypass tray R cover (2).
Figure 1 Bypass tray R cover removal
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
1:
5. Disconnect the connectors,
a. Release the harness from the retainer (1).
b. Release the harness from the harness holder (2).
c. Disconnect two connector (3).
6. Remove the harness holder,
a. Remove the screw (1).
b. Remove the harness holder (2).
Figure 3 Harness holder removal
April 2017
4-177
Figure 2:
Figure 2 Connectors
Figure 3:
Repairs and Adjustments
REP 80.1