Ipsec Configuration Mismatch Rap - Xerox VersaLink B7025 Service Manual

018-400 IPSEC Configuration Mismatch RAP

018-400 IPSEC error (setting mismatch).
Procedure
Advise the customer to clear the IPSEC setting mismatch and re-enable the IPSEC.
NOTE: Mismatched IPSEC settings occur when the password is not set because the authenti-
cation method is set to pre-shared key, or when IPSEC certificate is not set because the
authentication method is set to digital signature.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
018-405 User Account Disabled RAP
018-405 User account disabled error.
Procedure
Perform the steps that follow:
1. Advise the customer that there is a check mark at Account Invalid for the relevant user in
the active directory of the LDAP authentication destination server. The server has been
set to prohibit access from the relevant user.
2. Advise the customer to consult with the Server Administrator.
April 2017
2-239
Status Indicator RAPs
018-400, 018-405