5.
Remove the bypass tray retard pad,
a.
Remove the spring (1).
b.
Release the bosses (2), then remove the bypass tray retard pad.
Figure 4 Retard pad removal
Replacement
1.
The replacement is the reverse of the removal procedure.
2.
If new bypass tray retard pad is installed, enter
counter 954-805.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure
4.
dC135
HFSI Counter. Reset the HFSI
REP 80.18 L/H Cover
Parts List on
PL 80.40
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
If the L/H cover is removed for a long period of time, remove the drum cartridge,
1.
Remove the bypass tray,
REP
2.
Pull out tray 1. Remove the screw (1) that secures the hinge front cover,
April 2017
4-195
WARNING
GP
10. Disconnect the power cord
CAUTION
70.2.
Figure 1 Hinge front cover
Repairs and Adjustments
REP 80.17, REP 80.18
REP
90.4.
Figure
1.