Rep 60.5 Ffc Led Cable Assembly - Xerox VersaLink B7025 Service Manual

Replacement
1. The replacement is the reverse of the removal procedure.
2. When installing the lamp assembly, first tighten screw (1), then screw (2),
3. When installing the LED bracket, first tighten screw (3), then screw (4), then screw (5),
Figure 4.
Figure 4 Screws
4. If a new lamp assembly is installed, enter
that follow:
• Chain-Link: 956-803
• Chain-Link: 956-804
Repairs and Adjustments
REP 60.4, REP 60.5
Figure 4.
dC135 HFSI Counter. Reset the HFSI counters

REP 60.5 FFC LED Cable Assembly

Parts List on PL 60.20
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Do not touch the chip on the lamp assembly.
1. Remove the DADF, REP 5.1.
2. Remove the upper rear cover,
3. Disconnect the FFC LED cable assembly,
a. Move the connector housing catch (2) in the direction of the arrows.
b. Disconnect the FFC LED cable assembly (1).
Figure 1 FFC LED cable assembly
April 2017
4-150 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
CAUTION
REP 28.5.
Figure 1:
Launch Issue