Image Ready Rap - Xerox VersaLink B7025 Service Manual

045-310 Image Ready RAP

045-310 Controller image preparation failure detected.
Procedure
1. Switch off, then switch on the machine,
2. Reload the software, GP 4.
Status Indicator RAPs
045-310, 045-311, 045-396
GP 10.
045-311, 045-396 Controller Communication Fail RAP
BSD-ON: BSD 3.1 PWB Communications (ESS PWB to Drive PWB)
045-311 Communication failure between ESS PWB and DRIVE PWB was detected.
045-396 IO setup error of HASIC installed on drive PWB.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Check the connection between the ESS PWB ( P/J1334) and the drive PWB ( P/J401).
3. Install new components as necessary:
• ESS PWB, PL 3.10 Item
• Drive PWB, PL 1.10 Item
April 2017
2-450 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
6.
3.
Launch Issue