Rep 12.11 Lower Chute Assembly - Xerox VersaLink B7025 Service Manual

8. Remove the support bearing from the main paddle shaft assembly,
a. Remove the E-clip (1).
b. Remove the support bearing (2).
Figure 6 Support bearing removal
Replacement
The replacement is the reverse of the removal procedure.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer

REP 12.11 Lower Chute Assembly

Figure 6:
Parts List on
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the stapler assembly, refer to
2. Turn over the integrated office finisher.
3. Remove the transport motor,
a. Remove two screws (1).
b. Remove the belt (2) from the pulley.
c. Remove the transport motor (3).
4. Remove the gear,
a. Remove the E-clip (1).
b. Remove the gear (2).
c. Remove the KL-clip (3).
d. Remove the gear (4).
April 2017
4-69
PL 12.12
WARNING
GP
REP 12.4.
Figure 1:
Figure 1 Transport motor removal
Figure 2:
10. Disconnect the power cord
Repairs and Adjustments
REP 12.10, REP 12.11