Hdd Access Error 2 Rap - Xerox VersaLink B7025 Service Manual

016-981, 982 HDD Access Error 2 RAP

BSD-ON: BSD 3.9 ESS
016-981 HDD was determined to be full due to scan to email, scan to fax, secure print, delayed
print or sample print was specified when the HDD capacity is low.
016-982 HDD was determined to be full due to collate, stored or interrupted jobs.
Procedure
Perform the steps that follow:
1. Advise the customer to:
a. Process or delete the jobs (documents) stored in the same HDD partition, then
repeat the operation.
b. If step A does not resolve the problem, expand the HDD partition size of the relevant
service.
2. Reload the software, GP 4.
3. Check the wiring between the ESS PWB,
4. Initialise the hard disk. Refer to dC355
5. Initialize the Sys - System NVM, refer to dC301.
6. Install a new hard disk, PL 3.10 Item
Status Indicator RAPs
016-981, 982, 016-983
PL 3.10 Item 6 and the hard disk.
Hard Disk Diagnostics.
2.
016-983 Image Log HDD Full RAP
016-983 With the system data level of ensuring log image creation set to High, the log image
storage area on the disk becomes full (during processing a copy/scan job).
Procedure
Advise the customer to:
1. Cancel the job.
2. Re-run the job.
3. Delete unnecessary documents saved on the machine or change the level of ensuring
creation (to Low).
April 2017
2-210 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Launch Issue