License Required (Ps Image Log Kit) Rap - Xerox VersaLink B7025 Service Manual

016-230 License Required (PS Image Log Kit) RAP

016-230 The PS-ROM was installed with 'SW key: Image Log Kit for PS' in disabled state.
Procedure
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Set the image log kit SW key to 'Enabled'.
Status Indicator RAPs
016-230, 016-232
GP 10.
016-232 MRC HW Initialize Error RAP
016-232 MRC HW initialize error. an error has occurred during high compression board initial-
ization.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Reload the software, GP 4.
3. Install a new ESS PWB, PL 3.10 Item
April 2017
2-110 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
6.
Launch Issue