Xerox VersaLink B7025 Service Manual page 705

5. Remove the bottom plate, Figure 2:
a. Release the harness from the 5 clamps (1).
b. Disconnect eight connectors (2).
c. Remove the harness from the retainers (3).
d. Remove four screws (4).
e. Remove the bottom plate (5).
Figure 2 Bottom plate removal
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
6. Remove the finisher entrance sensor assembly,
a. Disconnect the connector (1).
b. Remove the self-tapping screw (2).
c. Remove the finisher entrance sensor assembly (3).
Figure 3 Finisher entrance sensor assembly removal
7. Remove the finisher entry sensor (1) from the bracket,
Figure 4 Finisher entry sensor removal
Replacement
The replacement is the reverse of the removal procedure.
April 2017
4-65
Figure 3:
Figure 4.
Repairs and Adjustments
REP 12.8