Rep 13.16 Finisher Stapler Assembly - Xerox VersaLink B7025 Service Manual

REP 13.16 Finisher Stapler Assembly

Parts List on PL 13.20
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the creaser knife assembly,
2. Remove the front cover assembly,
3. Remove the stapler cover, Figure 1:
a. Remove the screw (1).
b. Remove the stapler cover (2).
Figure 1 Stapler cover removal
Repairs and Adjustments
REP 13.16
WARNING
GP 10. Disconnect the power cord
REP 13.18.
REP 13.6.
4. Remove the finisher stapler assembly,
a. Disconnect the connectors (1).
b. Remove three screws (2).
c. Remove the finisher stapler assembly (3).
Figure 2 Finisher stapler assembly removal
Replacement
1. The replacement is the reverse of the removal procedure.
2. Perform ADJ 13.2 Booklet Folding and Stapling Position.
April 2017
4-106 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 2:
Launch Issue