Rep 80.33 Tray 2 Feeder Assembly (Ttm) - Xerox VersaLink B7025 Service Manual

3. Release the springs (1), then remove the nip rolls (2),
Figure 2 Nip rolls removal
Replacement
The replacement is the reverse of the removal procedure.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 2.
April 2017
4-207

REP 80.33 Tray 2 Feeder Assembly (TTM)

Parts List on PL 80.65
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Pull out tray 2. Remove the paper.
2. Remove tray 2.
3. Open the left cover assembly, PL 70.70 Item
4. Remove the ESD cover (1), Figure
Figure 1 ESD cover removal
WARNING
GP 10. Disconnect the power cord
7.
1:
Repairs and Adjustments
REP 80.32, REP 80.33