Internal Network Initialize Fail Rap - Xerox VersaLink B7025 Service Manual

016-352 Internal Network Initialize Fail RAP

016-352 Internal network initialization error.
Procedure
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Reload the software, GP 4.
Status Indicator RAPs
016-352, 016-353, 016-354
GP 10.
016-353, 016-354 IOT-Controller Communication Fail RAP
016-353 Communication cannot be established between the IOT and the ESS.
016-354 Communication cannot be established between the IIT and the controller.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Ensure that all connectors on the drive PWB,
Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are
securely connected.
3. Reload the software, GP 4.
4. If the fault persists, install a new components as necessary:
• ESS PWB, PL 3.10 Item
• Drive PWB, PL 1.10 Item
April 2017
2-120 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
PL 1.10 Item 3 and the ESS PWB,
6.
3.
PL 3.10
Launch Issue