Billing Meter Type Restoration Fail Rap - Xerox VersaLink B7025 Service Manual

124-345 Billing Meter Type Restoration Fail RAP

124-345 Billing meter type fail (one mismatches the others but cannot be automatically
repaired.)
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Switch off, then switch on the machine,
Y N
Perform SCP 5 Final Actions.
Enter dC131. Compare NVM values 720-002 and 720-062. Both values are different.
Y N
Install a new drive PWB, PL 1.10 Item
Install a new ESS PWB, PL 3.10 Item 6.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. The fault persists.
3.
124-346, 348, 354 Information Mismatch RAP
124-346 Billing count type fail (all the three are different from each other).
124-348 Modal break point fail (all the three are different from each other).
124-354 Territory info fail (contents corrupted, the controller pwb was replaced).
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. If the fault persists, install a new components as necessary:
• ESS PWB, PL 3.10 Item
• Drive PWB, PL 1.10 Item
April 2017
2-565
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
6.
3.
Status Indicator RAPs
124-345, 124-346, 348, 354