Rep 10.2 Exit 2 Roll - Xerox VersaLink B7025 Service Manual

REP 10.2 Exit 2 Roll

Parts List on PL 10.22
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Disengage the hooks, then remove the paper exit 1 weight assembly, (1),
NOTE: Take note of the orientation of the paper guides (2).
Figure 1 Weight assembly removal
2. Open the front cover.
3. Open the L/H cover.
4. Remove the pillar left cover, PL 28.05 Item
5. Open the exit 2 transport assembly.
6. Remove the LH top cover, PL 28.05 Item
Repairs and Adjustments
REP 10.2
WARNING
GP 10. Disconnect the power cord
Figure
13.
14.
7. Disconnect three connectors (1),
1.
8. Close the exit 2 transport assembly.
9. Remove the exit 2 transport assembly,
a. Remove four screws (1).
b. Remove the exit 2 transport assembly (2).
April 2017
4-50
Figure 2.
Figure 2 Connectors
Figure 3:
Figure 3 Transport assembly removal
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Launch Issue