Ps Booklet Illegal Color Mode Change Rap - Xerox VersaLink B7025 Service Manual

016-517 PS Booklet Illegal Color Mode Change RAP

016-517 PS documents to be printed into a booklet have black and white and color areas.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Advise the customer to resubmit the job with corrected parameters. Rewrite the Post-
Script file so that the page device and process color model cannot be changed in the pro-
cess.
2. Ensure that all connectors on the ESS PWB,
2 are securely connected. Ensure all surface mounted modules are securely connected.
3. Reload the software, GP 4.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
PL 3.10 Item 6 and hard disk,
016-518 PS Booklet Conflict WM RAP
016-518 PS booklet and watermarks were specified at the same time.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. PS booklet and watermark/UUID cannot be specified at the same time. Advise the cus-
tomer to cancel either one.
2. Ensure that all connectors on the ESS PWB,
PL 3.10 Item 2 are securely connected. Ensure all surface mounted modules are securely connected.
3. Reload the software,
April 2017
2-141
WARNING
GP 10. Disconnect the power cord. Electricity can cause
PL 3.10 Item 6 and hard disk,
GP 4.
PL 3.10 Item
Status Indicator RAPs
016-517, 016-518