REP 80.35 Tray 4 Feeder Assembly (TTM)
Parts List on
PL 80.70
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1.
Pull out tray 2, 3 and 4. Remove the paper.
2.
Lift out tray 3 and 4. Remove tray 2.
3.
Remove the support bracket (1),
Figure
Figure 1 Support bracket removal
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP
10. Disconnect the power cord
1.
4.
Prepare to remove the tray 4 feeder assembly,
a.
Disconnect 3 connectors (1).
b.
Remove the screw (2).
April 2017
4-211
Figure
2:
Figure 2 Preparation
Repairs and Adjustments
REP 80.35