Rear Panel 15 Volt Check, 86100A/B - Agilent Technologies Infinium DCA 86100A Service Manual

Rear Panel 15 Volt Check, 86100A/B

The purpose of this test is to verify that the 15V output on the back of the 86100A/B mainframe
provides 15 Volts DC +/- 0.5 Volts.
Equipment List 34401A Digital Multimeter
BNC to dual Banana plug
Limo-to-BNC cable
Manual Procedure
1 Connect the Limo-to-BNC cable to the 15 V output on the back of the DCA.
2 Connect the other end of the Limo-to-BNC cable to the input of the 34401A through the BNC to
dual Banana plug.
3 Take a DC voltage measurement on the 34401A.
4 Compare the result with the specifications.
Software
1 Prompt the user to connect "DUT 15V output" to the 15V output on the back of the DUT.
2 Set system switching for DUT 15V output to DMM.
3 Wait 1 second then measure the DC voltage on the 34401A.
4 Compare the measured data with the test line limits listed above and determine pass or fail.
Data Storage Store the measured voltage and the test status. Include the date and time the test was completed.
Performance Verification

Rear Panel 15 Volt Check, 86100A/B

4-17