Agilent Technologies Infinium DCA 86100A Service Manual page 35

Table 2-1. Comparison of Manual Tests to Automated Software Tests
86100A/B/C Software
Performance Verification
Check Internal Temperature
Trigger Port
Gated Trigger
Divided Trigger 86100C Opt
001
Rear Panel 15 Volt Output
86100A/B
Module Calibration
Delay & Timebase Accuracy
Fine Timebase (86100C) a
Trigger Level Accuracy
Calibrator Accuracy
Trigger Jitter Standard
Trigger Jitter Opt 001
Pattern Trig 86100C Opt 001
Optical Power
a. Due to its complexity, the Fine Timebase Accuracy for the Agilent 86100C can only be tested with an
automated test system.
Automated Testing and the VISION Test System
86100A/B Manual
Performance Verification
Not Checked
Not Checked
Gated Trigger
N/A (86100C only)
Not Checked
Module Calibration
Delay & Time Interval
—
Not Checked
Front Panel Calibrator
(Trig) Jitter Verification,
Trigger Sensitivity
Standard
Trig Verification Opt 001
Trigger Sensitivity 001
N/A (86100C only)
Not Checked
Controller Disk Drive Backup and Restore
Type of
Difference Verification
New test Functional
New test Functional
Same Functional
New test Functional
New test for Functional
86100A/B only
Same Functional
More points tested in Specification
software
New test for 86100C Specification
only
New test Functional
More points tested in Specification
software
More points tested in Specification
software
More points tested in Specification
software
New test Functional
New test Functional
2-7