Set Mainframe Serial Number - Agilent Technologies Infinium DCA 86100A Service Manual

Adjustments

Set Mainframe Serial Number

Set Mainframe Serial Number
Use this procedure after a hard drive replacement or if the serial number needs to be changed.
Manual Procedure
1 On the DCA screen, click Help, About 86100...
2 Press the Local hardkey 5 times (until Service Mode enabled is displayed).
3 On the DCA screen:
a Close the About 86100... dialog box (click Close).
b click Utilities, Service, Frame.
c click the entry field in the Frame dialog box (the touch screen keypad opens).
d Enter the mainframe serial number from the rear panel serial tag.
N O T E Entering the serial number manually must be done with the built-in touch screen keyboard. Do not
attempt to enter the serial number using an external keyboard.
e click OK.
f click Save.
4 Check the serial number entered:
a click Help
b click About 86100...
5 Confirm the new serial number appears in the dialog box.
Software Procedure
1 Select Adjust Calibration menu on the automated test software.
2 Select Program /Verify Serial number and follow the on-screen directions to change the serial
number of the DCA.
3-10