Agilent Technologies Infinium DCA 86100A Service Manual page 2

Notices
© Agilent Technologies, Inc. 2000-
2010
No part of this manual may be
reproduced in any form or by any
means (including electronic storage
and retrieval or translation into a
foreign language) without prior
agreement and written consent from
Agilent Technologies, Inc. as gov-
erned by United States and interna-
tional copyright lays.
Manual Part Number
86100-90112
Edition
January 2010
Edition 2
Printed in USA
Agilent Technologies, Inc.
Digital Test Division
1400 Fountaingrove Parkway
Santa Rosa, CA 95403, USA
Warranty
The material contained in this docu-
ment is provided "as is," and is sub-
ject to being changed, without
notice, in future editions. Further, to
the maximum extent permitted by
applicable law, Agilent disclaims all
warranties, either express or
implied, with regard to this manual
and any information contained
herein, including but not limited to
the implied warranties of merchant-
ability and fitness for a particular
purpose. Agilent shall not be liable
for errors or for incidental or conse-
quential damages in connection
with the furnishing, use, or perfor-
mance of this document or of any
information contained herein.
Should Agilent and the user have a
separate written agreement with
warranty terms covering the mate-
rial in this document that conflict
with these terms, the warranty terms
in the separate agreement shall con-
trol.
Technology Licenses
The hardware and/or software
described in this document are fur-
nished under a license and may be
used or copied only in accordance
with the terms of such license.
Restricted Rights Legend
If software is for use in the perfor-
mance of a U.S. Government prime
contract or subcontract, Software is
delivered and licensed as "Com-
mercial computer software" as
defined in DFAR 252.227-7014
(June 1995), or as a "commercial
item" as defined in FAR 2.101(a) or
as "Restricted computer software"
as defined in FAR 52.227-19 (June
1987) or any equivalent agency reg-
ulation or contract clause. Use,
duplication or disclosure of Soft-
ware is subject to Agilent Technolo-
gies' standard commercial license
terms, and non-DOD Departments
and Agencies of the U.S. Govern-
ment will receive no greater than
Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S.
Government users will receive no
greater than Limited Rights as
defined in FAR 52.227-14 (June
1987) or DFAR 252.227-7015
(b)(2) (November 1995), as applica-
ble in any technical data.
Safety Notices
CAUTION
Caution denotes a hazard. It calls
attention to a procedure which, if
not correctly performed or adhered
to, could result in damage to or
destruction of the product. Do not
proceed beyond a caution sign until
the indicated conditions are fully
understood and met.
WARNING
Warning denotes a hazard. It calls
attention to a procedure which, if
not correctly performed or adhered
to, could result in injury or loss of
life. Do not proceed beyond a warn-
ing sign until the indicated condi-
tions are fully understood and met.
ii