Agilent Technologies Infinium DCA 86100A Service Manual page 180

Replacing Instrument Assemblies
To Replace the A13 Acquisition and 86100C A14 Counter Assembly (Option 001)
Figure 7-67. 86100C A13 Acquisition Assembly and A14 Counter Assembly
7 Disconnect all of the remaining cables.
8 Refer to
N O T E The left and right strobe cables are interchangeable.
9 To re-install the assemblies, perform the above steps in the reverse order.
Figure 7-68. W28, W7, and W15 Cables from the A13 Acquisition Board
7-48
Figure 7-68 and Figure 7-69 for cable connections.