Agilent Technologies Infinium DCA 86100A Service Manual page 175

Figure 7-57. Removing Screws from Connectors in Module Drawer
5 Pull the A6 Distribution assembly away from the mainframe, as shown in
Figure 7-58. Pulling Out the A6 Distribution Assembly Board
6 Access the side of the instrument, and pull the board out far enough so that you can access the
brackets that secure the cables.
7 Remove the two screws that secure each bracket, as shown in
8 To re-install the A12 Distribution assembly, perform the above steps in the reverse order.
Replacing Instrument Assemblies
To Replace the A12 Distribution Assembly
Figure 7-58.
Figure 7-59.
7-43