Agilent Technologies Infinium DCA 86100A Service Manual page 245

Table 10-1. Major Assembly and Cable Identification (3 of 3)
Ref
Des Description
W15 Cable, A12P4 to A13P4
W16 Cable, RF bulkhead to A13 Strobe left
W17 Cable, RF bulkhead to A13 Strobe right
W20 Cable, SW1 port 2 to upper A12
W21 Cable, SW1 port 3 to upper A12
W22 Cable, SW1 port 5 to front panel trigger
W23 Cable, A13 TRG IN to SW1 center (SW2 P2 on Option 001)
W24 Cable, SW1 to A13P24 SRC SEL
W29 Cable, A13P21 to rear panel trigger gate
W30 Cable, SW1 center to SW2 P3 (Option 001)
W31 Cable, SW2 P4 to A14J2 Input (Option 001)
W32 Cable, SW2 P1 to A14J3 Output (Option 001)
W33 ATX Power, A18P1 to A14 CN11
W34 ATX Adapter, PS harness to A12P2
W35 Power ON/OFF Control, A7A1J2 to A4CN14
W36 Counter Power, A18P4 to A14P2
W37 USB Cable, A16P1 to A4USB CH. 2
Replaceable Parts—86100C
Major Assembly and Cable Location
Agilent Part
Number
86100-60004
86100-60080
86100-60080
86100-60080
86100-60080
86100-20052
86100-60064
86100-60011
86100-20013
86100-60058
86100-20053
86100-20053
86100-60073
86100-60041
86100-60070
86100-60071
86100-60068
10-5