Agilent Technologies Infinium DCA 86100A Service Manual page 157

Figure 7-33. Removing the Bar (86100A only)
4 Use a T-15 TORX driver to remove all of the circuit boards from the PC slots, as shown in
7-34.
N O T E The W10 ribbon cable connecting the A5 SVGA Adapter and the A6 Interface can be left
connected, and the boards pulled out together, as shown in
Figure 7-34. Removing the Circuit Boards from the Motherboard
Replacing Instrument Assemblies
To Replace the A4 PC Motherboard
Figure 7-35.
A15 Disk Drive
Interface
A6 Interface
A5 SVGA Adapter
A11 GP-IB
A14 LAN
Figure
7-25