Table of Contents
Advertisement
Before you begin
Before you can connect the CD-ROM or tape drive, ensure that you have completed the
following tasks:
1. Install the intermediate SCSI cable.
2. Set the SCSI ID and device termination settings as described in
Selecting the procedure for your switch
IF you are working with
a large Meridian 1 switch (such as
Option 51)
Option 11C
Option 11C Mini
Communication Server 1000
®
Avaya CallPilot
201i Server Hardware Installation
For
Meridian 1
Option 11C
Option 11C Mini
Communication Server 1000
•
Setting the CD-ROM drive SCSI ID and DIP switches
•
Setting SCSI device termination
Installing the SCSI cables for Meridian 1
page 51.
Installing the intermediate SCSI cable for
Option 11C
on page 60.
Installing the NTRH3502 SCSI cable for Option
11C Mini
on page 65.
Installing the NTRH3502 SCSI cable for
Communication Server 1000
on page 101
THEN see
To connect the CD-ROM and tape drives to the 201i
server (Meridian 1)
on page 116.
the corresponding procedure in section
To connect the CD-ROM and tape drives to the 201i
server (Meridian 1)
on page 116.
#unique_195/OptionelevencMini
#unique_195/CS1000
on page 120.
Before you begin
See
on
on page 85.
on page 98
on page 118.
December 2010
115
Advertisement
Table of Contents
