Replacing the LCD system information display panel
Use this information to replace the LCD system information display panel.
To install the LCD system information display panel, complete the following steps:
Step 1.
Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 100.
Step 2.
Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3.
1
Pull the tab on the LCD retention bracket to the left to disengage the retention bracket.
the retention bracket to remove it from the server.
Figure 75. Retention bracket removal
Step 4.
From inside the media cage, carefully insert the LCD system information display panel into place.
Figure 76. LCD system information display panel installation
1
Media cage
Media cage
Retention bracket
LCD display
.
Chapter 5
Removing and replacing components
2
Rotate
151