Mrpp Ring - Planet SGS-6341 Series Command Manual

Command Mode:
Global Mode.
Default:
The system doesn't enable MRPP protocol module.
Usage Guide:
If it needs to configure MRPP ring, it enables MRPP protocol. Executing "no mrpp enable"
command, it ensures to disable the switch enabled MRPP ring.
Example:
Globally enable MRPP.
Switch(config)#mrpp enable
62.8 mrpp poll-time
Command:
mrpp poll-time <20-2000>
Function:
Configure the query interval of MRPP.
Command mode:
Global mode.
Usage Guide:
Configure the query time to adjust the query interval of MRPP, the default interval is 100ms.
Example:
Set the query time as 200ms.
Switch(Config)# mrpp poll-time 200

62.9 mrpp ring

Command:
mrpp ring <ring-id>
no mrpp ring <ring-id>
Function:
Create MRPP ring, and access MRPP ring mode, the "no mrpp ring<ring-id>" command deletes
configured MRPP ring.
Parameter:
<ring-id> is MRPP ring ID, the valid range is from 1 to 4096.
62-5